Showing all 7 results

Biodegradable Fluid -Ecofog® VpCI®-337

FEATURES :

• Biodegradable (87% biodegradation in 28 days)
• Contains vapor phase inhibitors for multi-metal protection.
corrosion protection
• Forms a thin, self-healing layer of VpCI® that is environmentally
safe for use
• Ready-to-use
• Protection is immediate, convenient to apply, and easy to remove.
if required

COMMON APPLICATIONS:

• Piping and pipe spools
• Void space protection
• Complex internal cavities
• Double-wall spaces

Metals Safeguarded:

Hot/cold-rolled steel
• Silicon steel
• Stainless steel
• Cast iron
• Zinc
• Aluminum
• Copper
• Brass

Packaging and storage:

Ecofog® VpCI®-337 is packaged in 5 gallons (19 liters) of plastic pails, 55-gallon (208 liters) of metal drums, totes, and bulk. Minimum storage temperature: 40 °F (4 °C). Maximum storage temperature: 120 °F (49 °C).

Biodegradable Powders Corrosion Inhibiting Powders – VpCI®-609/609S

ADVANTAGES :

Inaccessible and vulnerable areas are protected by vapor-phase inhibition.
recessed surfaces
• Protected products can be shipped to customers without
removing powder
• If the VpCI layer is disturbed by moisture or the opening of an
enclosed space, the layer is replenished by continuous vapor.
redeposition
• Little or no surface preparation is required.
• Prevents future corrosion of pre-coated and painted surfaces
• VpCI layer typically does not need to be removed prior to
processing or use
• If required, the powder is easily removed by an air gun or water flush.
• Has no effect on alkalinity.
• Provides economical protection for very large applications

FEATURES :

Conforms to MIL-I-22110C
• Accepted by Cefas as an offshore chemical. Registered under
OCNS number 25717 allows use at 5,000 ppm.
• Provides liquid, vapor-phase, and interface protection (above)
the liquid level).
• Creates a monomolecular inhibiting layer on the metal surface
• Provides up to 24 months of continuous protection
• Does not contain nitrites, phosphates, or heavy metals

Metals Protected :
• Carbon steel           • Mild steel
• Other ferrous metals; • Stainless steel
• Aluminum

Corrosion Inhibiting Paper – VpCI®-146

TYPICAL APPLICATIONS:

The typical applications are:
• Metal-producing: coils, wire reels, plates, bars, etc.
• Metal forging and die casting: raw and machined
forgings and castings.
• Metalworking: stamping, sheet metal work, springs,
bearings, fasteners, tubes, pipes, nails, etc.
• Finished products: engines, machinery, equipment,
Tools, hardware, appliances, instruments, motors, etc.
• electrical and electronic components, controls, etc.

FEATURES :

• One product for all ferrous and non-ferrous metals
• Non-toxic. contains no nitrites, phosphates, silicones,
chromates, or other heavy metals.
• Completely recyclable and biodegradable.
• Effective against aggressive environments, including
humidity, SO2, H2S, and galvanic corrosion from
dissimilar metals

• Conforms to military specifications MIL-P-3420E.
• The protective layer does not need to be removed prior to
further surface finishing or coating application.
• Protects dry or oiled metals during storage, transit, and
overseas shipment.
• Natural-grade paper eliminates packaging
contamination.
• Incorporates corrosion protection and packaging into a single step.

METALS PROTECTED :

•Carbon Steel
•Stainless Steel
•Galvanized Steel
•Cast Iron
•Aluminum Alloys
•Copper
• Brass (30% Zn)

Packaging and storage:

Standard sizes: converter rolls 48″ x 11,000 feet (1.22
m x 3,353 m), roll stock 36″ x 200 yards (0.91 m x 183
m), 48″ x 200 yards (1.22 m x 183 m), and sheeting
perforated on the roll at 12″ x 12″ (0.31 m x 0.31 m). Custom
sizes and constructions can be customized upon request in both a
35 lbs. and 60 lbs./3000 sq. ft. paper

Corrosion Inhibitor Oil-Based Concentrate – Cortec Vpci 329

Features :

• Contains no hazardous chromates, nitrites, or phosphate inhibitors
• Significant flash and fire points
• Protects ferrous metals, zinc, galvanized steel, aluminum, copper, brass, cadmium, and silver
• Zinc-free
• Compatible with most oils
• Metal compartments can be fogged.
• Parts can be dipped and stored.
• VpCI-329 provides good salt spray resistance.
NSN #6850-01-470-3359 NATO #6850-66-132-6100
• VpCI-329 conforms to MIL-PRF-46002C (Grade 1).

CorShield – VpCI-368 / VpCI-368 EVP

FEATURES :

• Excellent salt spray protection
• Excellent outdoor protection
• Multimetal protection
• Excellent UV resistance
• Moisture displacing
• Cured film is heat stable up to 392°F (200°C)
• Commercial equivalent to MIL-PRF-16173E (Grades 1 and 2)
• NATO 6850-66-132-5848
• NATO 6850-66-132-6099
• NSN 8030-00-062-6950
• NSN 8030-00-231-2345

TYPICAL APPLICATIONS :

Pipe coating
• Parts Storage
• Underbody coating
• Wire rope
• Steel plate
• Machined parts

METALS PROTECTED :

• Carbon Steel
• Stainless Steel
• Copper
• Aluminum
• Cast Iron

PACKAGING AND STORAGE :

VpCI®-368 is available in 5 gallons (19 liters) steel pails, 55 gallons (208-liter) metal drums, totes, and bulk. Available as CorShield® VpCI®-368 in 11 oz. (312 g) aerosol cans.j

High Technology Vapor Phase Corrosion Inhibiting Films and Bags – VpCI®-126 Blue

FEATURES :

• Commercial equivalent to MIL-PRF-22019E(1)
• NACE TM0208-2008
• Meets German TL-8135-002 standards for corrosion
protection

METALS PROTECTED :
• Aluminum
• Galvanized Steel
• Carbon Steel
• Silicon Steel
• Stainless Steel
• Copper
• Brass
• Cast Iron

PACKAGING AND STORAGE :

To ensure the best product performance, store VpCI®-126 Blue film in original packaging, indoors and out of direct sunlight at 40-100 °F (4-38 °C). The shelf life of VpCI®-126 The blue film is 2 years.

Viper Polyurethane Seals

Features Viper Polyurethane Seals
Material The Viper seal is made from Polyurethane with high abrasion resistance properties, meaning it is resistant to wear
Seal Design the Material and internal design of the seal allows for the seal to mold to the shape of the rope.
The seal molds to the rope which means there is constant contact with the wire rope which enables consistent lubrication
Length of Seal Increased dwell time between the rope and the seal allows for increased opportunity for the lubricant